Making Connections 27
Hub-to-Hub Uplink
You can link two hubs or hub stacks to each other using any of the normal
twisted-pair (1x - 24x) ports or the Uplink port. Linking hubs using normal
twisted-pair ports requires crossover twisted-pair cables; linking using one
normal twisted-pair port and the Uplink port requires an ordinary straight-
through twisted-pair cable.
The Uplink port is shared with Port 1 and
they cannot be used at the same time.
The following table describes different methods of linking hubs:
To Next Page
Loading...
Need help?
General
