Unpacking and Setup 11
When installing the hub stack on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushion the hub and protect the hub
case from scratching.
Rack Mounting
The hub can be mounted in an EIA standard-size, 19-inch rack, which can be
placed in a wiring closet with other equipment. Attach the mounting brackets
at the hub front panel (one on each side), and secure them with the provid-
ed screws.
Then, use screws provided with the equipment rack to mount each hub in the
rack.
To Next Page
Loading...
Need help?
General
