Dual-Speed Stackable Hubs User’s Guide
Understanding Indicators20
1.
A good connection has been established with a console (for example,
a PC or other computer). The diagnostic port of a DFE-2600 series
master hub must be connected to the console's RS-232 serial port us-
ing a normal serial cable.
OR
2.
The console computer is on-line and connected to the on-board con-
sole program either through terminal emulation or a TELNET session.
Refer to Chapter 4,
Making Connections
, for directions on establishing a
connection with the diagnostic port, and Chapter 5,
Master Hub Setup and
Management
, for information about how to use the console interface.
To Next Page
Loading...
