Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management50
requests, allowing them to be used for network management purposes. Each
of these fields is restricted to 64 characters:
♦ System Name
. This parameter corresponds to the MIB-II object
sysName,
and is used to assign a name to the hub for administrative
purposes. The hub domain name is often used, provided a name has
been assigned.
♦ System Location
. This parameter corresponds to the MIB-II object
sysLocation
, and is used to indicate the physical location of the hub
for administrative purposes.
♦ System Contact
. This parameter corresponds to the MIB-II object
sysContact
, and is used to note the name and contact information of
the person responsible for administering the hub.
♦ Display Timeout.
An additional setting, the console time-out, may be
used to automatically log out the console interface after a predetermined
period of inactivity. This feature increases hub security by preventing ac-
cess to the hub after the interface has been inadvertently left logged on. A
setting of 0 disables this feature.
DFE-2600 Stackable Hub - System Configuration Menu
Mgmt Hardware Revision: Rev. 01
Boot PROM Firmware Version: Ver. 2.22
Software Version: Ver. 2.04
MAC Address: 0080C80D308C
System Description:
D-Link Corp. DFE-2600 Dual Speed Stackable Hub SNMP/
System Name [ ]
System Location [ ]
System Contact [ ]
Console/Telnet Display Timeout in Minutes [60 ]
HELP SAVE EXIT
To Next Page
Loading...
