D-Link DGS-1510 Series - Page 249

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
246
Switch#show ethernet ring g8032 status
Ethernet ring ring2,instance 0
-----------------------------------------
Description:
MEL: 1
Connect sub ring: ring1
R-APS Channel: invalid r-aps vlan,Protected VLAN:
Profile:
Guard timer: 500 milliseconds
Hold-Off timer: 0 milliseconds
WTR timer: 5 minutes
Revertive
Instance State: Deactivated
Admin RPL: -
Operational RPL: -
Port0 State: Forwarding
Port1 State: Forwarding
Admin RPL Port: -
Operational RPL Port: -
Ethernet ring campus,instance 0
-----------------------------------------
Description:
MEL: 1
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
This example shows how to display the brief information of the ERP instances.
Switch#show ethernet ring g8032 brief
Profile Inst Status Port-State
.ID
-------------------------------- --- ----------- -------------------
0 Deactivated p0:-,Forwarding
p1:-,Forwarding
0 Deactivated p0:-,Forwarding
p1:-,Forwarding
campus 1 Deactivated p0:eth1/0/1,Forwarding(RPL)
p1:-,Forwarding
0 Deactivated p0:-,Forwarding
p1:-,Forwarding
Total Entries: 4
Switch#
Display Parameters
MEL
Ring MEL value of ERP instance.
R-APS Channel
APS channel of ERP instance.
Protected VLANs
Service protected VLANs of ERP instance.
Profile
The profile associated with the ERP instance.
Guard timer
Time value for guard timer of the profile.
Hold-Off timer
Time value for hold-off timer of the profile.