D-Link DGS-1510 Series - Page 267

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
264
Switch#show mac-address-table notification change interface
Interface Added Trap Removed Trap
----------------------- -------------- --------------
eth1/0/1 Disabled Disabled
eth1/0/2 Disabled Disabled
eth1/0/3 Disabled Disabled
eth1/0/4 Disabled Disabled
eth1/0/5 Disabled Disabled
eth1/0/6 Disabled Disabled
eth1/0/7 Disabled Disabled
eth1/0/8 Disabled Disabled
eth1/0/9 Disabled Disabled
eth1/0/10 Disabled Disabled
eth1/0/11 Disabled Disabled
eth1/0/12 Disabled Disabled
eth1/0/13 Disabled Disabled
eth1/0/14 Disabled Disabled
eth1/0/15 Disabled Disabled
eth1/0/16 Disabled Disabled
eth1/0/17 Disabled Disabled
eth1/0/18 Disabled Disabled
eth1/0/19 Disabled Disabled
eth1/0/20 Disabled Disabled
eth1/0/21 Disabled Disabled
eth1/0/22 Disabled Disabled
eth1/0/23 Disabled Disabled
eth1/0/24 Disabled Disabled
eth1/0/25 Disabled Disabled
eth1/0/26 Disabled Disabled
eth1/0/27 Disabled Disabled
eth1/0/28 Disabled Disabled
Switch#
This example shows how to display the MAC address notification global configuration.
Switch#show mac-address-table notification change
MAC Notification Change Feature: Disabled
Interval between Notification Traps: 1 seconds
Maximum Number of Entries Configured in History Table: 1
Current History Table Length: 0
MAC Notification Trap State: Disabled
Switch#
This example shows how to display the MAC address notification history.