xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
170
DGS-3120-24TC:admin#show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID : 2
Guest VLAN Member Ports: 1:1-1:24
Total Entries: 1
16-7 show authentication ports
Description
This command is used to display authentication setting on port(s).
Format
show authentication ports {<portlist>}
Parameters
<portlist> - Enter a list of ports to be displayed.
If not specify the port list, displays compound authentication setting of all ports.
Restrictions
None.
Example
This example displays authentication setting for all ports:
DGS-3120-24TC:admin# show authentication ports
Command: show authentication ports
Port Methods Auth Mode Authentication VLAN(s)
---- ------------ ----------- ---------------------
1 None Host-based 1,3,5,9,11,88,16
18,56
2 Any Port-based
3 802.1X_IMPB Host-based
4 None Host-based 2000,2005
5 MAC_IMPB Host-based
6 None Host-based
7 None Host-based 1-20
8 802.1X_IMPB Host-based
9 None Host-based