D-Link DGS-3120-24PC - Show Authen_Enable [Default | Method_List_Name <String 15> | All]

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
74
Parameters
<string 15> - The user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined method list for promoting user's privilege to Admin level:
DGS-3120-24TC:admin# delete authen_enable method_list_name enable_list_1
Command: delete authen_enable method_list_name enable_list_1
Success.
DGS-3120-24TC:admin#
5-15 show authen_enable
Description
This command is used to display the method list of authentication methods for promoting user's
privilege to Admin level.
Format
show authen_enable [default | method_list_name <string 15> | all]
Parameters
default - Display default user-defined method list for promoting user's privilege to Admin level.
method_list_name - Display the specific user-defined method list for promoting user's privilege
to Admin level.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.
all - Display all method lists for promoting user's privilege to Admin level.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all method lists for promoting user's privilege to Admin level: