D-Link DGS-3120-24PC - Show Wac Ports

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
804
Format
show wac
Parameters
None.
Restrictions
None.
Example
Show global configuration about WAC:
DGS-3120-24TC:admin#show wac
Command: show wac
Web-based Access Control
--------------------------------
State : Enabled
Method : Local
Redirect Path : http://www.dlink.com
Virtual IP : 1.1.1.1
Virtual IPv6 : ::
Switch HTTP Port : 8888 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Disabled
DGS-3120-24TC:admin#
93-15 show wac ports
Description
This command is used to display the port level setting.
Format
show wac ports {<portlist>}
Parameters
ports - Specify a range of member ports to show the status.
<portlist> - (Optional) Enter a list of ports to display here.
Restrictions
None.