D-Link DGS-3120-24PC - Chapter 28 D-Link License Management System (DLMS) Command List

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
277
Chapter 28 D-Link License
management System (DLMS)
Command List
install dlms activation_code <string 25> {unit <unit_id 1-6>}
show dlms license {unit <unit_id 1-6>}
28-1 install dlms activation_code
Description
This command is used to install an activation code to activate or unlock function on the applicance.
Format
install dlms activation_code <string 25> {unit <unit_id 1-6>}
Parameters
<string 25> - Specify an activation code.
unit - (Optional) Specify the Swithc in the switch stack.
<unit_id 1-6> - Enter the unit ID of the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To install an activation code:
DGS-3120-24TC:admin#install dlms activation_code xBc7vNWsSpchuQkGZsTfPwcfa
Command: install dlms activation_code xBc7vNWsSpchuQkGZsTfPwcfa
Success.
Please reboot the device to active the license.
DGS-3120-24TC:admin#
28-2 show dlms license
Description
This command is used to display license information.