xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
825
Appendix C
System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in
the System Log of this Switch.
Category Event Description Log Information Severity Remark
[Unit <unitID>,] System started
up
[Unit <unitID>,] System warm
start
[Unit <unitID>,] System cold start
[Unit <unitID>,] Configuration
saved to flash by
console(Username:
<username>, IP: <ipaddr> )
and "IP:
<ipaddr>" are
XOR shown in
log string, which
means if user
login by
console, there
will no IP
information for
System log saved to flash
[Unit <unitID>,] System log
saved to flash by
console(Username:
<username>, IP: <ipaddr> )
and "IP:
<ipaddr>" are
XOR shown in
log string, which
means if user
login by
console, there
will no IP
information for
[Unit <unitID>,] Configuration
and log saved to flash by
console(Username:
<username>, IP: <ipaddr> )
and "IP:
<ipaddr>" are
XOR shown in
log string, which
means if user
login by
console, there
will no IP
information for
[Unit <unitID>,] Internal Power
failed
Internal Power is
recovered
[Unit <unitID>,] Internal Power is
recovered
[Unit <unitID>,] Redundant
Power failed
Redundant Power is
working
[Unit <unitID>,] Redundant
Power is working
[Unit <unitID>,] Side Fan failed
[Unit <unitID>,]Side Fan
recovered
[Unit <unitID>,] Firmware
upgraded by console
successfully (Username:
<username>, IP: <ipaddr> )
and "IP:
<ipaddr>" are
XOR shown in
log string, which
means if user
login by
console, there
will no IP
information for
Firmware upgrade was
unsuccessful
[Unit <unitID>,] Firmware
upgrade by console was
To Next Page
Loading...
