D-Link DGS-3120-24PC - Enable Authorization Attributes; Disable Authorization Attributes

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
171
16-8 enable authorization attributes
Description
This command is used to enable authorization.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
This example sets authorization global state enabled:
DGS-3120-24TC:admin# enable authorization attributes
Command: enable authorization attributes
Success.
DGS-3120-24TC:admin#
16-9 disable authorization attributes
Description
This command is used to disable authorization.
Format
disable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
This example sets authorization global state disabled: