D-Link DGS-3120-24PC - Show Authen Server_Host

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
82
Example
To delete an authentication server host:
DGS-3120-24TC:admin# delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DGS-3120-24TC:admin#
5-25 show authen server_host
Description
This command is used to display the authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server hosts:
DGS-3120-24TC:admin#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
-------------------- -------- ----- ------- ---------- -----------------------
10.1.1.222 TACACS+ 15555 10 - ******
Total Entries : 1
DGS-3120-24TC:admin#
5-26 config authen parameter response_timeout
Description
This command is used to configure the amount of time waiting or user input on console, telnet,
SSH application.