D-Link DGS-3120-24PC User Manual

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
404
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a JWAC user:
DGS-3120-24TC:admin#config jwac user 112233
Command: config jwac user 112233
Enter a old password:*****
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3120-24TC:admin#
39-23 delete jwac
Description
This command is used to delete JWAC users from the local database.
Format
delete jwac [user <username 15> | all_users]
Parameters
user - Specify the user name to be deleted.
<username 15> - Specify the user name to be deleted. The user name can be up to 15
characters long.
all_users - Specify all user accounts in the local database will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a JWAC user from the local database:
DGS-3120-24TC:admin#delete jwac user 112233
Command: delete jwac user 112233
Success.
DGS-3120-24TC:admin#

D-Link DGS-3120-24PC Specifications

General

Device Type	Managed Switch
PoE Power Budget	370W
MAC Address Table Size	16K entries
Jumbo Frame Support	Yes
Layer	Layer 2/Layer 3
Layer 3 Features	Static Routing
VLAN Support	Yes
Management	Web-based GUI, CLI, SNMP
Power Supply	Internal power supply
Storage Temperature	-40 to 70 °C
Humidity	5% to 95% (non-condensing)
Ports	24 x 10/100/1000Base-T PoE ports 4 x Gigabit SFP ports
Jumbo Frame Size	9216 bytes