D-Link DGS-3120-24PC - Show Authorization; Config Authentication Server Failover

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
172
DGS-3120-24TC:admin# disable authorization attributes
Command: disable authorization attributes
Success.
DGS-3120-24TC:admin#
16-10 show authorization
Description
This command is used to display authorization status.
Format
show authorization
Parameters
None.
Restrictions
None.
Example
This example displays authorization status:
DGS-3120-24TC:admin#show authorization
Command: show authorization
Authorization for Attributes: Enabled
DGS-3120-24TC:admin#
16-11 config authentication server failover
Description
This command is used to configure authentication server failover function.
Format
config authentication server failover [local | permit | block]
Parameters
local - Use local DB to authenticate the client.
permit - The client is always regarded as authenticated.
block - Block the client (Default setting).