D-Link DGS-3120-24PC - Chapter 87 Traffic Segmentation Command List

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
762
Chapter 87 Traffic Segmentation
Command List
config traffic_segmentation [<portlist> | all] forward_list [null | all | <portlist>]
show traffic_segmentation {<portlist>}
87-1 config traffic_segmentation
Description
This command is used to configure the traffic segmentation.
Format
config traffic_segmentation [<portlist> | all] forward_list [null | all | <portlist>]
Parameters
<portlist> - Specify a range of ports to be configured.
all - Specify that all the ports will be used for this configuration.
forward_list - Specify a range of port forwarding domain.
null - Specify a range of port forwarding domain is null.
all – Specify all ports to be configured.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure traffic segmentation:
DGS-3120-24TC:admin# config traffic_segmentation 1:1-1:10 forward_list 1:11-
1:15
Command: config traffic_segmentation 1:1-1:10 forward_list 1:11-1:15
Success.
DGS-3120-24TC:admin#
87-2 show traffic_segmentation
Description
This command is used to display current traffic segmentation table.