xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
242
Example
To enable the DHCP local relay function:
DGS-3120-24TC:admin# enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
23-4 disable dhcp_local_relay
Description
This command is used to globally disable the DHCP local relay function on the Switch.
Format
disable dhcp_local_relay
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the DHCP local relay function:
DGS-3120-24TC:admin# disable dhcp_local_relay
Command: disable dhcp_local_relay
Success.
23-5 show dhcp_local_relay
Description
This command is used to display the current DHCP local relay configuration.
Format
show dhcp_local_relay
Parameters
None.
To Next Page
Loading...
