xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
328
35-7 enable igmp_snooping
Description
This command is used to enable IGMP snooping on the Switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP snooping on the Switch:
DGS-3120-24TC:admin# enable igmp_snooping
Command: enable igmp_snooping
Success.
35-8 disable igmp_snooping
Description
This command is used to disable IGMP snooping on the Switch. Disabling IGMP snooping allows
all IGMP and IP multicast traffic to flood within a given IP interface. Note that disable
igmp_snooping will also disable the forward multicast router only function.
Format
disable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
To Next Page
Loading...
