D-Link DGS-3120-24PC - Page 340

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
336
DGS-3120-24TC:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
Data Driven Learning Max Entries : 128
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Enabled
Querier Role : Querier
Querier IP : 10.90.90.90
Querier Expiry Time : 0 secs
State : Enabled
Fast Leave : Disabled
Rate Limit : No Limitation
Proxy Reporting : Disabled
Proxy Reporting Source IP : 0.0.0.0
Version : 3
Data Driven Learning State : Enabled
Data Driven Learning Aged Out : Disabled
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3120-24TC:admin#
35-17 show igmp_snooping rate_limit
Description
This command is used to display the IGMP snooping rate limit setting.
Format
show igmp_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports - Specify the port range.
<portlist> - Enter the range of ports here.
vlanid - Specify the VLAN range..
<vlanid_list> - Enter the VLAN ID list here.
Restrictions
None.