D-Link DGS-3120-24PC - Page 347

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
343
To display the IGMP snooping statistics counter for a port:
DGS-3120-24TC:admin# show igmp_snooping statistics counter ports 1
Command: show igmp_snooping statistics counter ports 1
Port #1
------------------------------------------------
Group Number : 10
Receive Statistics
Query
IGMP v1 Query : 0
IGMP v2 Query : 0
IGMP v3 Query : 0
Total : 0
Dropped By Rate Limitation : 0
Dropped By Multicast VLAN : 0
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 100
IGMP v3 Report : 0
IGMP v2 Leave : 0
Total : 100
Dropped By Rate Limitation : 0
Dropped By Max Group Limitation : 90
Dropped By Group Filter : 0
Dropped By Multicast VLAN : 0
Transmit Statistics
Query
IGMP v1 Query : 0
IGMP v2 Query : 0
IGMP v3 Query : 0
Total : 0
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 0
IGMP v3 Report : 0
IGMP v2 Leave : 0
Total : 0
Total Entries : 1
DGS-3120-24TC:admin#
35-22 show igmp access_authentication ports
Description
This command is used to display the current IGMP Access Control configuration.