D-Link DGS-3120-24PC - Page 349

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
345
1:16 Disabled
1:17 Disabled
1:18 Disabled
1:19 Disabled
1:20 Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
35-23 clear igmp_snooping statistics counter
Description
This command is used to clear the IGMP snooping statistics counter.
Format
clear igmp_snooping statistics counter
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the IGMP snooping statistics counter:
DGS-3120-24TC:admin# clear igmp_snooping statistic counter
Command: clear igmp_snooping statistic counter
Success.
DGS-3120-24TC:admin#
35-24 config mld_snooping
Description
This command is used to configure MLD snooping on the Switch.
Format
config mld_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> |all] {state [enable |
disable] | fast_done [enable | disable] | proxy_reporting {state [enable | disable] | source_ip
<ipv6addr>}(1)}(1)
Parameters
vlan_name - Specify the name of the VLAN for which MLD snooping is to be configured.