xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
387
Restrictions
<ipv6networkaddr> - (Optional) The destination network of the route.
<ipv6addr> - (Optional) Specify the destination 128-bit length IPv6 address to be displayed.
static - (Optional) Specify to display only the static route entries.
hardware - (Optional) Specify to display only the route entries which have been wrote into
hardware table.
Example
Show all the IPv6 routes:
DGS-3120-24TC:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0 Protocol: Static Metric: 1
Next Hop : 3FFC::1 IPIF : System
Backup : Primary Status : Inactive
IPv6 Prefix: 3FFC::/64 Protocol: Local Metric: 1
Next Hop : :: IPIF : System
Total Entries: 2
To Next Page
Loading...
