D-Link DGS-3120-24PC - Page 399

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
395
DGS-3120-24TC:admin#disable jwac forcible_logout
Command: disable jwac forcible_logout
Success.
DGS-3120-24TC:admin#
39-10 enable jwac udp_filtering
Description
This command is used to enable the JWAC UDP filtering function. When UDP filtering is enabled,
all UDP and ICMP packets except DHCP and DNS packets from unauthenticated hosts will be
dropped.enable jwac udp_filtering
Format
enable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC UDP filtering:
DGS-3120-24TC:admin#enable jwac udp_filtering
Command: enable jwac udp_filtering
Success.
DGS-3120-24TC:admin#
39-11 disable jwac udp_filtering
Description
This command is used to disable JWAC UDP filtering.
Format
disable jwac udp_filtering
Parameters
None.