D-Link DGS-3120-24PC - Page 451

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
447
43-19 show lldp_med
Description
This command is used to display the Switch’s general LLDP-MED configuration status.
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the Switch’s general LLDP-MED configuration status:
DGS-3120-24TC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class : Network Connectivity Device
Hardware Revision : A1
Firmware Revision : 2.00.003
Software Revision : 2.00.010
Serial Number : abcd1234
Manufacturer Name : D-Link
Model Name : DGS-3120-24TC Gigabit Ethernet S
Asset ID :
PoE Device Type : PSE Device
PoE PSE Power Source : Primary
LLDP-MED Configuration:
Fast Start Repeat Count : 5
LLDP-MED Log State:Enabled
DGS-3120-24TC:admin#
43-20 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.