xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
631
69-7 delete execute_config
Description
This command is used to delete the schedule of executing configuration.
Format
delete execu
te_con
fig [all
| time_
range
<range_n
am
e 32> {con
fig <p
athnam
e>}]
Parameters
all - Delete all the schedules of executing configuration.
time_range - The time range of the schedules that execute configuration to be deleted.
<range_name 32> - Enter the time range to be deleted. Maximum 32 characters.
config - (Optional) The configuration file name on file system.
<pathname> - Enter the configuration file path name.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete all the schedule of executing configuration:
DGS-3120-24TC:admin# delete execute_config all
Command: delete execute_config all
Success.
69-8 show execute_config
Description
This command is used t o display all the executive schedules.
Format
show execute_config
Parameters
None.
Restrictions
None.
To Next Page
Loading...
