xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
827
Firmware successfully uploaded
by console (Username:
<username>, IP: <ipaddr> )
and "IP:
<ipaddr>" are
XOR shown in
log string, which
means if user
login by
console, there
will no IP
information for
Firmware upload by console was
unsuccessful! (Username:
<username>, IP: <ipaddr> )
and "IP:
<ipaddr>" are
XOR shown in
log string, which
means if user
login by
console, there
will no IP
information for
Port <[unitID:]portNum> link up,
Port <[unitID:]portNum> link
down
Unit<UnitID>,MAC:<macaddr>
Hot insertion.
Unit<UnitID>,MAC:<macaddr>
Hot removal.
Firmware upgraded to SLAVE
Firmware upgraded to SLAVE
unsuccessfully! (Username:
Stacking topology change.
<Stack_TP_TYPE>. Master(Unit
Backup master changed
to master
Backup master changed to
master. Master (Unit: <unitID>)
Slave changed to master. Master
(Unit: <unitID>)
Hot insert failed, box ID conflict:
Unit <unitID> conflict (MAC:
<macaddr> and MAC:
[Unit <unitID>,] Successful login
through Console (Username:
<username>)
[Unit <unitID>,] Login failed
through Console (Username:
<username>)
[Unit <unitID>,] Logout through
Console (Username:
<username>)
Console session timed out
[Unit <unitID>,] Console session
timed out (Username:
<username>)
Successful login through Web
(Username: <username>, IP:
(Username: <username>, IP:
Logout through Web (Username:
<username>, IP: <ipaddr> )
Web session timed out
(Username: <username>, IP: