D-Link DGS-3120-24PC - Page 845

xStack
®
DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
841
2. swPowerID
3. swPowerStatus
swPowerRecover
Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.3
swUnitInsert
Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.1
swUnitRemove
Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.2
swUnitFailure
Unit Failure notification.
Binding
1. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.3
swUnitTPChange
The stacking topology change notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.4
swUnitRoleChange
The stacking unit role change notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.5
lldpRemTablesChange
A lldpRemTablesChange notification is sent
when the value of
lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to
trigger LLDP remote systems table
maintenance polls.
Binding
1. lldpStatsRemTablesInserts
2. lldpStatsRemTablesDeletes
3. lldpStatsRemTablesDrops
4. lldpStatsRemTablesAgeouts
1.0.8802.1.1.2.0.0.1
lldpXMedTopologyChangeDetected
A notification generated by the local device
sensing a change in the topology that
indicates that a new remote device attached
to a local port, or a remote device
disconnected or moved from one port to
another.
Binding
1. lldpRemChassisIdSubtype
2. lldpRemChassisId
3. lldpXMedRemDeviceClass
1.0.8802.1.1.2.1.5.4795.0.1
swDdmAlarmTrap
The trap is sent when any parameter value
exceeds the alarm threshold value or
recover to normal status depending on the
configuration of the trap action.
Binding
1. swDdmPort
2. swDdmThresholdType
3. swDdmThresholdExceedType
4. swDdmThresholdExceedOrRecover
1.3.6.1.4.1.171.12.72.4.0.1
swDdmWarningTrap
The trap is sent when any parameter value
exceeds the warning threshold value or
recover to normal status depending on the
configuration of the trap action.
Binding
1. swDdmPort
2. swDdmThresholdType
3. swDdmThresholdExceedType
4. swDdmThresholdExceedOrRecover
1.3.6.1.4.1.171.12.72.4.0.2
dot3OamNonThresholdEvent
A dot3OamNonThresholdEvent notification
is sent when a local or remote non-threshold
crossing event is detected. A local event is
1.3.6.1.2.1.158.0.2