Internet/Print Server User’s Guide
Configuration Settings46
Description: A login script is used to provide login prompt
responses when required by the ISP login procedures. Each
line item in the script table should correspond with a prompt
that the ISP makes once the modem connection is established.
The prompt string information entered in the table should in-
clude an indication of what data is being asked for at each step
in the login process. Reply string data should be provided ex-
actly as it would be if it were hand entered.
Print Server Configuration
The settings listed here are those available for print server control.
Refer to Chapter 4 for more information about setting-up and using
the print server functions of the internet/print server.
Parallel Port -> Port Name
Options: A string of letters and numbers up to 32 characters
long.
Default Value: IS-xxxxxx-P1 (where “xxxxxx” is the last six
digits of the device’s MAC address).
Description: An identifying label for the print server port.
Important: If the port will be used for Windows NT 4.0
clients, the port name cannot exceed 12
characters. If the port will be used for LAN
manager clients, the port name cannot ex-
ceed eight characters.
To Next Page
Loading...
Need help?
General
