Configuration Settings 47
Parallel Port -> Speed
Options: High/Low.
Default Value: High
Description: The parallel port speed setting controls the rate
(in general) at which print job data will be transmitted to the
printer. Most newer printers can accept high speed data
transmission; If your printer loses characters, then you may
need to choose low speed mode.
Parallel Port -> PJL Printer
Options: Yes/No.
Default Value: No
Description: If the printer being used is compatible with the
HP PJL (Printer Job Language) protocol, enabling this setting
will allow the printer to provide information to the inter-
net/print server about the printer model, status, and other
details.
NetBEUI -> Workgroup Name
Options: A string of letters and numbers up to 15 characters
long.
Default Value: WORKGROUP
Must Be User Modified? No (unless you want the print
server to be assigned to another network group).
Description: Each Microsoft Networking workstation or
server has a workgroup name. Workgroup names determine
To Next Page
Loading...
Need help?
General
