Quick Installation 1
QUICK INSTALLATION
This section takes you through a step-by-step minimum installation
and setup procedure for the internet/print server. Please refer to the
main text of this manual for detailed information about the setup
and operation of this device.
Getting Started
Step 1: Unpack the device. Make certain no components have
been lost or damaged. A packing list is provided on page 11.
Step 2: Choose an installation site on a flat, level surface or wall
near the modem or ISDN/TA you plan to use for internet
connections or near the network line you plan to use for a
LAN connection, and near the printer you would like to
share through the server. Note that the internet/print
server can be hung on a wall using the wall mounting
equipment included with the product.
Making Connections
Step 3: Connect the internet/print server to your LAN using a
Category 3, 4 or 5, twisted-pair cable and the device’s single
RJ-45 LAN port. This connection should be made to an
Ethernet or Fast Ethernet switch or hub. (The RJ-45 port
looks like a phone jack.)
To Next Page
Loading...
Need help?
General
