Internet/Print Server User’s Guide
Quick Installation2
Step 4: Connect the internet/print server to the printer using the
LPT port and a parallel cable. See Chapter “Print Server
Setup” for information on how to setup the print server set-
tings and see the IS Admin User’s Guide for information on
shared print services.
Step 5: Connect the internet/print server to a modem or ISDN/TA
using the device’s serial port (COM). (Note that your mo-
dem or ISDN/TA should already be connected and setup
according to the instructions included with it.)
Step 6: Plug the power adapter into the device and into an outlet.
To Next Page
Loading...
