D-Link DSL-2745 User Manual

97D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Static Routing
This section allows you to set up static routes for your network.
Once you have entered your Static Route Criteria, click Add Route.
To update an existing route, select it from the table below, make your
adjustments and click Update.
To delete a static route, select it from the table and click Delete Selected.
To see the current IP routes, click Show Routes.
Enable: Check this box to enable static routing.
Destination: Enter the IP address of the destination device.
Subnet Mask: Enter the subnet mask of the destination device.
Net Hop: Enter the IP address of the next hop in the IP route to the
destination device.
Metric: The metric cost for the destination.
Interface: Select the interface for the specied route.
HOST
STATIC ROUTE TABLE
The table shows a list of currently dened static routes.

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English