D-Link DSL-2745 User Manual

23D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Local Network
This optional section allows you to congure the local network and DHCP
settings of your device. The DHCP service supplies IP settings to clients
congured to automatically obtain IP settings that are connected to the device
through the Ethernet port. You may also set static DHCP reservations from this
screen. Click Apply when you are done.
Interface Name: LAN indicates you are conguring the LAN address settings.
IP Address: Enter the IP address of the DSL-2745. The default IP address is
192.168.1.1. Note: If you change the IP address, once you click Apply
you will need to enter the new IP address in your browser in order to
access the conguration utility.
Subnet Mask: Enter the subnet mask. The default subnet mask is 255.255.255.0.
Secondary IP: If you wish to add another IP address to use to configure the
DSL-2745, check this box and enter the IP address and subnet
mask.
IGMP Snooping: Check the box to enable Internet Group Management Protocol
(IGMP) snooping for extra network traffic security.
LAN INTERFACE SETTINGS
LAN IP: The current Router LAN IP and Subnet mask are displayed.
DHCP Server: By default, DHCP is enabled. Select None to disable the DHCP
server.
IP Pool Range Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
DHCP SERVER SETTINGS

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English