D-Link DSL-2745 User Manual

74D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
DMZ
This page allows you to manually congure the router’s DMZ settings. Since
some applications are not compatible with NAT, the device supports the use of
a DMZ IP address for a single host on the LAN. This IP address is not protected
by NAT and it is visible on the Internet with the correct type of software. Note
that any client PC in the DMZ is exposed to various types of security risks. If you
use DMZ, take measures (such as client-based virus protection) to protect the
remaining client PCs on your LAN from possible contamination through DMZ.
DMZ CONFIGURATION
Select the WAN Interface to associate with a DMZ Host IP address, LAN IP address. Click
Apply Changes when you are done or Reset WAN Interface to revert to the previously
saved settings.
CURRENT DMZ TABLE
The currently assigned DMZ is displayed in this list. To delete the DMZ, select it using the
radio button and press Delete Selected.

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English