D-Link DSL-2745 - Time and Date

54D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Time and Date
This section enables you to use an international time server to set the internal
time and date for the DSL-2745.
System Time:
Enable or disable automatic synchronisation with an Internet Time
Server.
Time Zone:
Select your time zone from the drop down menu.
Daylight Saving
Settings:
Enable or disable Daylight Savings.
Synchronize time
with:
Select the method of setting the time from NTP Server automatically,
PC’s Clock, or Manually.
SYSTEM TIME
Server:
Select ntp1.dlink.com, ntp.dlink.com, or other. If other is selected,
enter the NTP server address in the box provided.
Server2:
Select ntp1.dlink.com, ntp.dlink.com, or other. If other is selected,
enter the NTP server address in the box provided.
Interval:
Enter the frequency which the time is updated.
GMT time:
The current time is displayed.
NTP CONFIGURATION
Click Apply Changes when you are done or Reset to revert to the previous
settings.