D-Link DSL-2745 User Manual

91D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Port Mapping
From the Port Mapping page you can bind the WAN interfaces and the LAN interfaces to
the same group.
The procedure for manipulating a mapping group is as follows:
Step 1 Select a group from the table.
Step 2 Select interfaces from the WAN and LAN interface list and add them to
interface group list.
Step 3 Click Apply to save the changes.
Port Mapping: Enable/Disable port mapping.
PORT MAPPING SETUP

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English