D-Link DSL-2745 User Manual

70D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Port Triggering
Port triggering allows ports to be opened when trac is detected on specied
ports. This is used for facilitating communication between applications and
servers behind a NAT rewall.
Nat Port Trigger: Select Enable or Disable.
NAT PORT TRIGGER STATUS
Usual Application
Name:
These commonly used applications are provided as an example of
how to input port ranges.
User-defined
Application name:
Name the rule you are about to define for your application. You
may define up to 8 port ranges per application.
Start Match Port: Enter the starting source port range your DSL-2745 will forward
traffic from.
End Match Port: Enter the ending source port range your DSL-2745 will forward
traffic from.
Trigger Protocol: Select the protocol to monitor for to trigger this rule.
Start Relate Port: Enter the starting destination port range your DSL-2745 will
forward traffic to.
End Relate Port: Enter the ending destination port range your DSL-2745 will
forward traffic to.
APPLICATION TYPE
Click Apply Changes to have your changes take effect.
Click Apply Changes to have your changes take effect.

D-Link DSL-2745 Specifications

General

Brand	D-Link
Model	DSL-2745
Category	Network Router
Language	English