EasyManuals Logo

D-Link DSL-2745 User Manual

D-Link DSL-2745
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
68D-Link DSL-2745 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
MBSSID Encryption: WEP
Click Apply Changes to have your changes take effect.
SSID Type: Select either VAP0, VAP1, or VAP2.
Encryption: WEP
Key Length: Select the Encryption cipher key bit strength. The available options
are 64-bit and 128-bit.
Key Format: Select the Encryption key format. If you selected a 64-bit
key length, you may choose ASCII (5 Characters) or HEX(10
Characters). If you selected a 128-bit key length, you may choose
ASCII (13 Characters) or HEX(26 Characters).
Default Tx Key: Select which Tx key is used as the default.
Encryption Key
1-4:
Enter a wireless key to use on your wireless network.
The following settings are available if Use 802.1x Authentication is checked:
Authentication
RADIUS Server:
Enter the Port, IP address, and Password of the RADIUS Server.
Backup RADIUS
Server:
Enter the Port, IP address, and Password of the backup RADIUS
Server.
WIRELESS SECURITY SETTINGS
Use of WEP encryption is not recommended, as it only oers a trivial amount
of protection for your wireless data. Unless your clients do not support WPA
encryption, it is recommended that you select WPA2(AES) or WPA/WPA2
Mixed instead of WEP as they are more secure.

Table of Contents

Other manuals for D-Link DSL-2745

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2745 and is the answer not in the manual?

D-Link DSL-2745 Specifications

General IconGeneral
BrandD-Link
ModelDSL-2745
CategoryNetwork Router
LanguageEnglish

Related product manuals