D-Link DSR-150 - Configuration Files; Backup

D-Link DSR-Series User Manual 234
Section 9 - Maintenance
Conguration Files
To backup your conguration les:
1. Click Maintenance > Firmware & Cong > Backup / Restore tab.
Path: Maintenance > Firmware & Cong > Backup / Restore
After you congure the router, you can back up the conguration settings. When you back up the settings, they
are saved as a le. You can then use the le to restore the settings on the same router if something goes wrong
or on a dierent router (must be the same model) that will replace the existing router.
Backup
2. To Download Debug Logs click Download. You will be prompted to save a le with the extension “.tgz”.
Select a safe location on your computer and save the le. The settings will be saved in this le in the Tar
archive form.
3. To save the le to your computer, click Save to System (PC). If you have a USB thumb drive connected
to the router, you can click Save to USB Port 1 (or Port 2).