D-Link DSR-150 - Wireless Network Settings; Access Points Configuration

D-Link DSR-Series User Manual 79
Section 5 - Connect to the Internet
Path: Network > IPv6 > Static Routing
Manually adding static routes to this device allows you to dene the path selection of trac from one interface
to another. There is no communication between this router and other devices to account for changes in the path;
once congured the static route will be active and eective until the network changes.
The List of Static Routes displays all routes that have been added manually by an administrator and allows several
operations on the static routes.
To create a new static route:
1. Click Network > IPv6 > Static Routing.
Static Routing
2. Click Add New IPv6 Static Route.
3. Complete the elds in the table on the next page and click Save.