D-Link DSR-150 - WAN2 DMZ Settings; Wan

D-Link DSR-Series User Manual 41
Section 5 - Connect to the Internet
WAN2/ DMZ Settings
WAN
Path: Network > Internet > WAN2/DMZ Settings
Select WAN and select an Internet connection type from the drop down list. Please refer to the previous pages
for more information. If you want to set WAN2 port to DMZ, select DMZ and click Save. This will allow you to
congure the DMZ port on the DMZ Settings pge. If the port is not congured for WAN and DMZ, it can be used
as a LAN port.
Note: In DSR-500/1000AC, the Congurable Port eld does not include LAN port option.