D-Link DSR-Series User Manual 85
Section 5 - Connect to the Internet
Path: Network > IPv6 > Teredo Tunnel
Note: Teredo Tunnel is available only in DSR-Octeon models.
Teredo Tunnel provides IPv6 connectivity for IPv6-capable hosts having no native connection to an IPv6 network.
Teredo Tunnel
To congure Teredo Tunnel, follow the steps given below:
1. Click Network > IPv6 > Teredo Tunnel.
2. The elds present on this page are given in the following table.
Field Description
Activate Teredo Tunneling Enable or disable Teredo Tunneling.
Primary Server Enter the primary teredo server.
Secondary Server Enter the secondary teredo server.
Save Click Save to activate your changes.
To Next Page
Loading...
