EasyManuals Logo

D-Link DSR-150 User Manual

D-Link DSR-150
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #255 background imageLoading...
Page #255 background image
D-Link DSR-Series User Manual 241
Section 9 - Maintenance
Routing Logs
Path: Maintenance > Logs Settings > Routing Logs
Trac can be tracked based on whether the packet was accepted or dropped by the rewall. Denial of service
attacks, general attack information, login attempts, dropped packets, and similar events can be captured for
review.
Note: Enabling logging options may generate a signicant volume of log messages and is recommended for
debugging purposes only.
Trac through each network segment (LAN, WAN, DMZ) can be tracked based on whether the packet was
accepted or dropped by the rewall.
Accepted Packets are those that were successfully transferred through the corresponding network segment (i.e.,
LAN to WAN). This option is particularly useful when the Default Outbound Policy is “Block Always” so you can
monitor trac that is passed through the rewall.
Dropped Packets are packets that were intentionally blocked from being transferred through the corresponding
network segment. This option is useful when the Default Outbound Policy is Allow Always”.
1. Click Maintenance > Log Settings > Routing Logs > IPv4.
2. Toggle which events you want to log to ON and click Save.

Table of Contents

Other manuals for D-Link DSR-150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSR-150 and is the answer not in the manual?

D-Link DSR-150 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
PC in (D-Sub)No
USB ports quantity0
Ethernet LAN (RJ-45) ports8
Supported network protocolsIPSec, PPTP, L2TP
Security algorithms3DES, DES, SSL/TLS
VPN tunnels quantity21
Filtering descriptionKeyword
MAC address filtering-
SafetycUL, LVD (EN60950-1)
CertificationWEEE
Electromagnetic compatibilityFCC Class B, CE Class B, C-Tick, IC
Mean time between failures (MTBF)240000 h
Input current1.5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)7.44 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product colorBlack
Input voltage12 V
Ports quantityThe number of ports or external interfaces to which other equipment can be connected.
Management platformHTTP, HTTPS, CLI, SNMP v1/v2c/v3
Connectivity technologyWired
Compliance industry standardsRoHS
Weight and Dimensions IconWeight and Dimensions
Depth118 mm
Width208 mm
Height35 mm
Weight- g

Related product manuals