EasyManuals Logo

D-Link DSR-150 User Manual

D-Link DSR-150
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #283 background imageLoading...
Page #283 background image
D-Link DSR-Series User Manual 269
Section 11 - Troubleshooting
Symptom: Router cannot obtain an IP address from the ISP.
Recommended action:
1. Turn o power to the cable or DSL modem.
2. Turn o the router.
3. Wait ve minutes, and then reapply power to the cable or DSL modem.
4. When the modem LEDs indicate that it has resynchronized with the ISP, reapply power to the
router. If the router still cannot obtain an ISP address, see the next symptom.
Symptom: Router still cannot obtain an IP address from the ISP.
Recommended action:
1. Ask your ISP if it requires a login program — PPP over Ethernet (PPPoE) or some other type of login.
2. If yes, verify that your congured login name and password are correct.
3. Ask your ISP if it checks for your PCs hostname.
4. If yes, select Network > Internet > WAN1 Settings or WAN2 settings. Select DHCP as the Connection
Type, and enter the Host Name of your ISP account.
5. Ask your ISP if it allows only one Ethernet MAC address to connect to the Internet, and therefore
checks for your PCs MAC address.
6. If yes, inform your ISP that you have bought a new network device, and ask them to use the rewall’s
MAC address.
7. Alternatively, select Network > Internet > WAN1 Settings or WAN2 settings. Under MAC Address
section, choose Clone your PC’s MAC as the MAC Address Source.
Symptom: Router can obtain an IP address, but PC is unable to load Internet pages.
Recommended action:
1. Ask your ISP for the addresses of its designated Domain Name System (DNS) servers. Congure
your PC to recognize those addresses. For details, see your operating system documentation.
2. On your PC, congure the router to be its TCP/IP gateway.

Table of Contents

Other manuals for D-Link DSR-150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSR-150 and is the answer not in the manual?

D-Link DSR-150 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
PC in (D-Sub)No
USB ports quantity0
Ethernet LAN (RJ-45) ports8
Supported network protocolsIPSec, PPTP, L2TP
Security algorithms3DES, DES, SSL/TLS
VPN tunnels quantity21
Filtering descriptionKeyword
MAC address filtering-
SafetycUL, LVD (EN60950-1)
CertificationWEEE
Electromagnetic compatibilityFCC Class B, CE Class B, C-Tick, IC
Mean time between failures (MTBF)240000 h
Input current1.5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)7.44 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product colorBlack
Input voltage12 V
Ports quantityThe number of ports or external interfaces to which other equipment can be connected.
Management platformHTTP, HTTPS, CLI, SNMP v1/v2c/v3
Connectivity technologyWired
Compliance industry standardsRoHS
Weight and Dimensions IconWeight and Dimensions
Depth118 mm
Width208 mm
Height35 mm
Weight- g

Related product manuals