D-Link DSR-150 - Page 342

D-Link DSR-Series User Manual 328
Appendix D - Log Output Reference
kmalloc failed DEBUG %s: %s: mem=0x%lx, irq=%d, INFO
unknown cyrpto ioctl cmd received %x, cmd DEBUG %s: %s: mem=0x%lx, irq=%d, INFO
register_chrdev returned ZERO DEBUG %s: %s, dev_info, version INFO
const char *descr, krb5_keyblock *k) { DEBUG %s: driver unloaded, dev_info INFO
F password, &pdata DEBUG %s, buf INFO
test key, key DEBUG %s: %s (, dev_info, ath_hal_version INFO
pre-hashed key, key DEBUG %s: driver unloaded, dev_info INFO
const char *descr, krb5_keyblock *k) { DEBUG %s: driver unloaded, dev_info INFO
AES 128-bit key, &key DEBUG %s: Version 2.0.0 INFO
const char *descr, krb5_keyblock *k) { DEBUG %s: driver unloaded, dev_info INFO
test key, key DEBUG %s: driver unloaded, dev_info INFO
pre-hashed key, key DEBUG
wlan: %s backend registered, be-
>iab_name
INFO
const char *descr, krb5_keyblock *k) { DEBUG wlan: %s backend unregistered, INFO
128-bit AES key,&dk DEBUG
wlan: %s acl policy registered, iac-
>iac_name
INFO
256-bit AES key, &dk DEBUG
wlan: %s acl policy unregistered, iac-
>iac_name
INFO
WARNING: DEBUG %s: %s, dev_info, version INFO
bwMonMultipathNxtHopSelect:: checking rates DEBUG %s: driver unloaded, dev_info INFO
hop :%d dev:%s usableBwLimit = %d
currBwShare = %d lastHopSelected = %d
weightedHopPrefer = %d ,
DEBUG %s: %s (, dev_info, ath_hal_version INFO
1. selecting hop: %d lastHopSelected = %d ,
selHop, lastHopSelected
DEBUG %s: driver unloaded, dev_info INFO
4. hop :%d dev:%s usableBwLimit = %d
currBwShare = %d lastHopSelected = %d
weightedHopPrefer = %d ,
DEBUG %s: %s: mem=0x%lx, irq=%d, INFO
2. selecting hop: %d lastHopSelected = %d ,
selHop, lastHopSelected
DEBUG %s: %s, dev_info, version INFO