D-Link DSR-Series User Manual 57
Section 5 - Connect to the Internet
Host Name
Specify the complete Host Name/Domain Name which is to be mapped with WAN interface IP in the
selected DDNS service.
Oray User Type The Oray User is trying to connect to Oray.net.
Oray Domain Species the complete Domain name for the Oray.net service.
Type
Choose among Dynamic, Static, Custom types depending on how frequently the WAN Interface IP
changes. This eld is available only when DynDNS is selected as DDNS Service Type.
Wildcard
The wildcards feature will allow all sub-domains of your DynDNS Host Name to share the same public
IP as the Host Name. This option can be enabled here if not done on the DynDNS Web site.
Use external (NAT rout-
er’s) IP address
Enabling this option would use external (NAT router’s) IP address instead of device’s WAN IP address.
Force Update Interval
Specify the Periodic Update Interval to automate router to update the host information on selected
DDNS Service.
URL
Specify the custom URL for the Dynamic Update Service where the DynDNS Server is located and with
which the IP Update request is processed. Eg.: for DynDNS URL may look like ‘ /nic/update?hostname=abc.
dyndns.net&myip=10.10.12.60&wildcard=ON ‘
Additional DDNS
Options
Specify the additional options available for the Custom DDNS Service. This eld is Optional. Eg.: Options
may look like “alias alias.”
Save
Click Save to save your changes.
Cancel
Click Cancel to revert to the previous settings.