Unified Services Router User Manual
116
The VPN policy is one half of the IKE/VPN policy pair required to establish an Auto
IPsec VPN tunnel. The IP addresses of the machine or machines on the two VPN
endpoints are configured here, along with the policy parameters required to secure the
tunnel
Figure 79: IPsec policy configuration continued (Auto policy via IKE)
A Manual policy does not use IKE and instead relies on manual keying to exchange
authentication parameters between the two IPsec hosts. The incoming and outgoing
security parameter index (SPI) values must be mirrored on the remote tunnel endpoint.
To Next Page
Loading...
