D-Link DSR-250N - Configuring Time Zone and NTP; Figure 126: SNMP System Information for this Router

Unified Services Router User Manual
170
Figure 126: SNMP system information for this router
9.3 Configuring Time Zone and NTP
Tools > Date and Time
You can configure your time zone, whether or not to adjust for Daylight Savings Time,
and with which Network Time Protocol (NTP) server to synchronize the date and time.
You can choose to set Date and Time manually, which will store the information on
the router’s real time clock (RTC). If the router has access to the internet, the most
accurate mechanism to set the router time is to enable NTP server communication.
 Accurate date and time on the router is critical for firewall schedules, Wi-Fi power
saving support to disable APs at certain times of the day, and accurate logging.
Please follow the steps below to configure the NTP server:
1. Select the router’s time zone, relative to Greenwich Mean Time (GMT).
2. If supported for your region, click to Enable Daylight Savings.
3. Determine whether to use default or custom Network Time Protocol (NTP) servers. If
custom, enter the server addresses or FQDN.