Unified Services Router User Manual
28
Figure 12: DMZ configuration
In order to configure a DMZ port, the router’s configurable port must be set to DMZ in the Setup >
Internet Settings > Configurable Port page.
2.4 Universal Plug and Play (UPnP)
Advanced > Advanced Network > UPnP
Universal Plug and Play (UPnP) is a feature that allows the router to discovery devices on the network
that can communicate with the router and allow for auto configuration. If a network device is detected
by UPnP, the router can open internal or external ports for the traffic protocol required by that
network device.
Once UPnP is enabled, you can configure the router to detect UPnP-supporting devices on the LAN
(or a configured VLAN). If disabled, the router will not allow for automatic device configuration.
Configure the following settings to use UPnP:
To Next Page
Loading...
