D-Link DSR-250N - Page 261

Unified Services Router User Manual
259
__FUNCTION__
%s: failed to register sysctls!,
proc_name
DEBUG
PPP: VJ uncompressed error
ERROR
PKTLOG_TAG %s: proc_mkdir failed,
__FUNCTION__
DEBUG
ppp_decompress_frame: no memory
ERROR
PKTLOG_TAG %s: pktlog_attach failed
for %s,
DEBUG
ppp_mp_reconstruct bad seq %u <
%u,
ERROR
PKTLOG_TAG %s:allocation failed for
pl_info, __FUNCTION__
DEBUG
PPP: couldn't register device %s (%d),
ERROR
PKTLOG_TAG %s:allocation failed for
pl_info, __FUNCTION__
DEBUG
ppp: destroying ppp struct %p but
dead=%d
ERROR
PKTLOG_TAG %s: create_proc_entry
failed for %s,
DEBUG
ppp: destroying undead channel %p !,
ERROR
PKTLOG_TAG %s: sysctl register failed
for %s,
DEBUG
PPP: removing module but units
remain!
ERROR
PKTLOG_TAG %s: page fault out of
range, __FUNCTION__
DEBUG
PPP: failed to unregister PPP device
ERROR
PKTLOG_TAG %s: page fault out of
range, __FUNCTION__
DEBUG
JBD: bad block at offset %u,
ERROR
PKTLOG_TAG %s: Log buffer
unavailable, __FUNCTION__
DEBUG
JBD: corrupted journal superblock
ERROR
PKTLOG_TAG
DEBUG
JBD: bad block at offset %u,
ERROR
Logging should be disabled before
changing bufer size
DEBUG
JBD: Failed to read block at offset %u,
ERROR
%s:allocation failed for pl_info, __func__
DEBUG
JBD: error %d scanning journal, err
ERROR
%s: Unable to allocate buffer, __func__
DEBUG
JBD: IO error %d recovering block
ERROR
%s:allocation failed for pl_info, __func__
DEBUG
./Logs_kernel.txt:303:KERN_ERR
ERROR
%s: Unable to allocate buffer, __func__
DEBUG
./Logs_kernel.txt:304:KERN_ERR
ERROR
Atheros HAL assertion failure: %s: line
%u: %s,
DEBUG
JBD: recovery pass %d ended at
ERROR
ath_hal: logging to %s %s,
ath_hal_logfile,
DEBUG
%s: %s:%d: BAD SESSION MAGIC \
ERROR
ath_hal: logging disabled
DEBUG
%s: %s:%d: BAD TUNNEL MAGIC \
ERROR
%s%s, sep, ath_hal_buildopts[i]
DEBUG
msg->msg_namelen wrong, %d, msg-
>msg_namelen
ERROR
failed to allocate rx descriptors: %d,
error
DEBUG
addr family wrong: %d, usin-
>sin_family
ERROR
ath_stoprecv: rx queue %p, link %p,
DEBUG
udp addr=%x/%hu, usin-
>sin_addr.s_addr, usin->sin_port
ERROR
no mpdu (%s), __func__
DEBUG
%s: %s:%d: BAD TUNNEL MAGIC
ERROR
Reset rx chain mask. Do internal reset.
(%s), __func__
DEBUG
%s: %s:%d: BAD TUNNEL MAGIC
ERROR
OS_CANCEL_TIMER failed!!
DEBUG
socki_lookup: socket file changed!
ERROR
%s: unable to allocate channel table,
__func__
DEBUG
%s: %s:%d: BAD TUNNEL MAGIC
ERROR
%s: unable to collect channel list from
hal;
DEBUG
%s: %s:%d: BAD SESSION MAGIC \
ERROR
%s: cannot map channel to mode; freq
%u flags 0x%x,
DEBUG
%s: %s:%d: BAD TUNNEL MAGIC \
ERROR
%s: unable to reset channel %u
(%uMhz)
DEBUG
msg->msg_namelen wrong, %d, msg-
>msg_namelen
ERROR
%s: unable to restart recv logic,
DEBUG
addr family wrong: %d, usin-
>sin_family
ERROR
%s: start DFS WAIT period on channel
%d, __func__,sc->sc_curchan.channel
DEBUG
udp addr=%x/%hu, usin-
>sin_addr.s_addr, usin->sin_port
ERROR